Diversified Designs
Project of the Week of 05/20/14
Project of the week is a 10 Station Filter Docking Check Valve Distribution Manifold made of Acetal. This part is roughly 26" x 2-5/8" x...
top of page
610-703-2389
4201 William Penn Hwy, Easton PA. 18045
Contact-Us
PLASTIC MACHINING SERVICES
Diversified Designs
- Aug 3, 2022
- 2 min
Project of the Week of 05/12/14
Project of the week is a 10 Station Filter Docking Press Station made of Acetal. This part is roughly 26" x 13" x 2-5/8" in size. This...
2 views0 comments
Diversified Designs
- Aug 3, 2022
- 1 min
Project of the Week of 10/13/14
Project of the week are 4 different SAE Port Flanges typically made of aluminum and steel, these however are low pressure and made from...
2 views0 comments
Diversified Designs
- Jul 27, 2022
- 1 min
Project of the Week of 01/28/14
Project of the week is a Plastic Peg Manifold made of Natural Acetal. We did aid in the finale design of this part; original part was...
2 views0 comments
Diversified Designs
- Dec 16, 2021
- 6 min
Machining Plastics: Case Study Acetal
In this Series of discussions, we will explore some past projects that involved some trouble shooting and some machining tips that were...
0 views0 comments
Diversified Designs
- Mar 18, 2021
- 3 min
Engineering Notebook-Acetals
In this Insight Blog Series, we are transcribing handwritten notes taken over the years working with plastics, the notebook did not site...
0 views0 comments
bottom of page