top of page
610-703-2389
4201 William Penn Hwy, Easton PA. 18045
Contact-Us
PLASTIC MACHINING SERVICES
Pedro Henriques
Aug 23, 20222 min read
Project of the Week of 02/16/09
Project of the week is a Transformer Bobbins that is injection molded from Natural Rynite FR-530 Polyester resin. This material is used...
3 views0 comments
Pedro Henriques
Aug 17, 20222 min read
Project of the Week of 04/20/09
Project of the week is an Upper Motor Housing Cover injection molded from Rynite FR-543 Polyester resin. According to our records this...
1 view0 comments
Pedro Henriques
Aug 5, 20222 min read
Project of the Week of 11/13/06
Project of the week is an injected molded Tag Holder made of Red Cycolac ABS. These parts are roughly 8" x 5" x 1/2" and is used to hold...
1 view0 comments
Pedro Henriques
Aug 4, 20221 min read
Project of the Week of 05/20/14
Project of the week is a 10 Station Filter Docking Check Valve Distribution Manifold made of Acetal. This part is roughly 26" x 2-5/8" x...
0 views0 comments
Pedro Henriques
Aug 3, 20222 min read
Project of the Week of 05/12/14
Project of the week is a 10 Station Filter Docking Press Station made of Acetal. This part is roughly 26" x 13" x 2-5/8" in size. This...
1 view0 comments
Pedro Henriques
Aug 3, 20221 min read
Project of the Week of 10/13/14
Project of the week are 4 different SAE Port Flanges typically made of aluminum and steel, these however are low pressure and made from...
1 view0 comments
Pedro Henriques
Jul 30, 20221 min read
Project of the Week of 04/07/07
Project of the week is a Door Latch Sensor Housing machined from High Impact Polystyrene. This part was eventually injection molded once...
0 views0 comments
Pedro Henriques
Jul 29, 20222 min read
Project of the Week of 06/05/07
Project of the week is a Dual Balance Wheel Housing made of Black ABS. This part was eventually injection molded once tested and proven....
1 view0 comments
Pedro Henriques
Jul 28, 20222 min read
Project of the Week of 09/04/06
Project of the week is a Medical Clip Stake Holder made of Blue SUSTAPEEK MG. This part will eventually be injection molded once tested...
1 view0 comments
Pedro Henriques
Jul 28, 20221 min read
Project of the Week of 06/23/13
Project of the week is a 7075-aluminum adapter plate we designed and machined for a client to convert an original diesel engine...
1 view0 comments
Pedro Henriques
Jul 28, 20222 min read
Project of the Week of 08/25/06
Project of the week is a Pipe Mount made of black ABS. This part was originally machined from solid 1020 steel and then converted to...
1 view0 comments
Pedro Henriques
Jul 27, 20221 min read
Project of the Week of 01/28/14
Project of the week is a Plastic Peg Manifold made of Natural Acetal. We did aid in the finale design of this part; original part was...
1 view0 comments
Pedro Henriques
Jul 26, 20222 min read
Project of the Week of 07/04/22
Project of the week is a Plastic Wear Plate that supports heavy loads and must be non-abrasive to its mating surfaces. This was...
1 view0 comments
Pedro Henriques
Jul 25, 20221 min read
Project of the Week of 07/25/22
Project of the week is a Plastic Glass Lens Plate originally made from 1060 Aluminum alloy and Acrylic. This part is roughly 5" x 4" x...
1 view0 comments
Pedro Henriques
Jul 18, 20222 min read
Project of the Week of 07/18/22
We would like to start a Project of the week series or blog to show case what products or project challenges are being designed, machined, a
1 view0 comments
Pedro Henriques
Jun 16, 20223 min read
Why Machine Your Plastic Parts?
CNC Machining of parts is the best manufacturing choice when low to medium volume of plastic components is required. The process from...
0 views0 comments
Pedro Henriques
Jun 16, 20226 min read
Effective Selection and Design Techniques
When it comes to designing plastic components, questions must be asked and addressed in order to effectively select materials and design...
2 views0 comments
Pedro Henriques
May 19, 202215 min read
Plastic is NOT Metal
"Plastic is not metal" this will be the talk for today, the first lesson fabricators will discover when attempting to machine plastic for...
1 view0 comments
Pedro Henriques
Apr 14, 202210 min read
Machining Plastics: Case Study Polycarbonate
In this Series of discussions, we will explore some past projects that involved some trouble shooting and some machining tips that were...
5 views0 comments
Pedro Henriques
Apr 14, 20222 min read
Why Consider Using Plastics for Your Part?
In this modern time Engineered Plastics are, wear resistant, flexible and have low coefficients of friction. Engineers for the past...
0 views0 comments
bottom of page